2006 Cabo 35 Express

Destin, FL

$319,000

Contact Us

Specifications

QUICK SPECS

Manufacture: Cabo
Country: US
Category: Sportfish
Model: 35 Express
Year: 2006

DIMENSIONS

Length: 35 ft
Draft: 2.83 ft
Beam: 13 ft

ACCOMMODATIONS

Heads: 1

SPEED / WEIGHT

Number of engines: 2
Fuel Type: diesel
Engine Type: Inboard
Engine year: 2006
Engine Hours: 2100
Fuel Capacity: 400|gallon
Water Capacity: 100|gallon
Holding tank: 1

May 2024: Recent Price Reduction. Seller Purchased his 45 Cabo, Looking for Offers.

This is one Super Clean, Very Nice Looking and Great Performing Cabo 35. The engines only have 2100 Hours and have been very well maintained. This package of Cummins Power on the 35 Cabo is a great fishing and cruising combination. 

If you have considered any mid 30s Express Sport Fish this is the Cabo you need to see. The interior shows extremely well and is evidence of the care given to this vessel. 

Recent Maintenance:

– Bottom Job Including Prop Speed and Prop Tuning:  (12/2023 )

– Replaced Battery Charger, 2023

– New Isenglass port and stbd side pieces, front in good shape (complete March 2024 )

– New combing pads ( March 2024 ) 

– Two New Aftercoolers, ( March 2024 )

– All Routine Maintenace performed at the proper intervals. 

 

This Cabo 35 will not disappoint. 

 

Disclaimer

Zorn Yacht Sales is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Marine Group - Emerald Coast.

    Recent Service

    – Jan 2024, New Bottom and Prop Speed

    – New Eisenglass March 2024

    – New Coming Pads April 2024

    – New Aftercoolers March 2024

    – All services kept up to date. 

    Equipment List

    Westerbeke 7.5 kw Generator ( 2400 Hours ) 

    – Cockpit Twin In Deck Macerated Fish Boxes

    – Transom Live Well

    – Bait Prep Station

    Bait / Drink Freezer

    – Teak Rocket Launcher

    – 6 Person Life Raft

    – Custom Teak Cockpit and Helm Deck

    – Hydraulic Lifts for Engine Room Access

    Rupp Tournament Double Spreader Outriggers ( will pull dredges )  

    – Full Tuna Tower with Buggy Top and Custom Underside Paint

    – LED Spreader Lights

    – Custom Cushions for Cockpit to Provide Mezzanine Style Seating

    – New Oversized Low Pickup Bilge Pumps

    – Teaser Reels

    – Center Rigger Multiple Rocket Launchers/Rod Holders with Tower

    – Dripless Shaft Seals, Replaced 2021

    – Reverso Oil Change System

    – Trim Tabs

     

     

     

    Electronics and Navigation

    • Simrad dual NSE 12″ displays mounted in Mahogany cabinet
    • Simrad 6 KW 4′ open array radar
    • Simrad BSM2 1000 watt chirp sounder
    • Simard WM2 Sirius marine weather
    • Simrad AC24/AC42 Autopilot w/ WR10 wireless control
    • Simrad NAIS 400
    • Furuno RD 30 temp/depth/speed
    • Icom m-602 VHF radio
    • Glendinning electronic controls with trolling valves
    • ACR Remote Spotlight
    • Tower – Simrad NSE 8 display, electronic controls, and ICOM ram

    Layout and Design

    • Teak & Holly Sole
    • Interior wood, teak, satin finish
    • Latches, positive, cabinet drawers and doors
    • L-Shaped lounge, converts to upper and lower sleeping berths
    • Lighting, recessed LED upgrade
    • Ports (2) opening
    • Stereo/CD/MP3, (4) speakers: (2) salon (2) forward
    • Storage, compartments and drawers below berth
    • Storage, locker, hanging, cedar-lined, starboard
    • AC duplex outlet/GFI protected
    • Access hatch to bilge
    • Access to anchor rope/chain locker
    • Air conditioning/heating, 10,000 BTU capacity
    • Berth, double, diagonal, port, bunkcover
    • Dressing seat, upholstered
    • Fabrics & coverings, fine selection throughout
    • Foredeck hatch w/ retractable shade
    • Storage, rod locker, 8-rod capacity

    Galley

    • AC duplex outlet/GFI protected
    • Cooktop, ceramic, two-burner, recessed with Corian cover
    • Corian countertop w/ custom Corian sea rails
    • Latches, positive, cabinet doors and drawers
    • Microwave/convection oven
    • Refrigerator/freezer, side by side, AC/DC
    • Sink, single, deep, molded-in
    • Storage, compartments and drawers throughout
    • Undercabinet lighting

    Pipewelders Tower

    • Tuna Tower Molded Top with Single Perimeter Rail
    • Sunshade, Arch-Style
    • Sunshade, Oval route at Centerline
    • Antenna masts, threaded, on sunshade
    • Antenna standoffs, (2) on sunshade
    • Flag halyards, (2) at ring or underside platform
    • Bench seat and Backrest at sunshade
    • Control box, custom, contoured
    • Compass, flush mounted on control box
    • Horns, installed on tower control box
    • Steering and Controls – Glendinning/electronic with trolling valves
    • Molded fiberglass standing platform
    • Spreader lights, linear, euro-style, 2 in 1 in molded pod
    • Anchor run light on mast
    • Run lights, LEDNav red/green and white stern
    • Radar mounting pod
    • Under-hardtop lights, LED (3) white (1) red w/ (2) dimmers
    • Tower Station – Tachometers, starts/stops, trim tab controls
    • Outriggers – Lee, single-spreader, solid back brace, double-rigged
    • Center rigger installed and rigged
    • Outboard grab rails, port and starboard
    • Grab rail, custom port side
    • Cushions, (2) custom removable
    • Enclosure – Polycarbonate 4 side (new October 2015)
    • (4) rod holders on back of hardtop
    • (2) rod holders mounted on each tower leg (4 total)

    Helm and Deck

    • Forward facing companion seat, port side
    • Sliding companionway door, opaque white acrylic panel
    • Engine access hatch with gas spring
    • Helm console, integrally molded
    • Molded fiberglass helm deck, hydraulically lifted with cockpit control unit
    • Storage cabinet at helm
    • Tackle center, drawers for gear storage and organization
    • Canvas console cover
    • Flush mounted Compass with light
    • Engine instrument panel with audible warning system
    • Fire & bilge water level alarms
    • Stainless steel helm wheel
    • Stainless steel switch panel
    • (2) underwater lights
    • Custom stainless steel recessed anchor roller assembly
    • Stainless steel bow cleats, spring line cleats and stern cleats
    • Bow pulpit, integral molded fiberglass
    • Custom deck rails
    • Molded fiberglass using polyester resin, biaxial stitched fabric reinforcement and core construction
    • Stainless steel stern hawse pipes
    • (3) Windshield wipers, self parking with pantograph arms
    • (3) Windshield washers, wet arms
    • Heady duty windlass, DC electric

    Engine Room

    • Cummins QSC 540hp engines 
    • Oil change system, mains and generator
    • Trolling valves
    • 16 gallon holding tank with monitor, macerator and dockside discharge
    • Mufflers, fiberglass with backwash surge tube
    • Propeller shafts, double taper, couplers, high-strength stainless steel
    • 4-blade Nibral propellers
    • Teleflex-Seastar hydraulic steering system
    • High-strength bronze rudders with high load bearings (low friction, precise control)
    • Bronze sea cocks, UL approved for marine application fitted on all thru-hulls below waterline
    • Dripless lip seal type stuffing boxes
    • 11 gallon stainless steel water heater, AC
    • Water intake scoops, bronze, high speed with integral seawater strainers
    • Fuel filters with water separators on main engines and generator
    • Fuel lines, metal braided and fire retardant
    • Fuel tank, fiberglass fire retardant vinylester resin
    • Hydraulic helm deck lift system, marine grade
    • (3) high water bilge alarms
    • Bilge, white gelcoat finished
    • (4) bilge pumps, (3) automatic/manual (1) automatic
    • Electronic controls, engine synchronizer and back up
    • Emergency bilge suction valve on main engines
    • Engine alarm system
    • (2) engine hour meters
    • Engine room liner, white gelcoat finished
    • Engine room blowers
    • Automatic fire extinguishing system

    Fishing Equipment

    • Freezer plate, AC in cockpit ice box
    • Refrigeration plate, AC in cockpit fish box
    • Release marine rocket launcher
    • Pancake teaser reels
    • (2) underwater lights
    • (4) Marinco Electric Reel receptacles
    • Bait prep center – sink, rigging board and tackle storage fitted with custom lid, gas spring, full length stainless steel piano hinge and custom latch
    • 40 gallon bait tank molded into transom
    • Courtesy lighting under gunwales and helm deck overhang
    • (2) fish boxes, large capacity, insulated, macerator pump out system
    • Gunwale padding, high density foam, white vinyl covered
    • Hatches, lazarette and fish boxes, heavy duty, gasketed, drains, gutters and full length stainless steel piano hinge and custom latch
    • Hose & pistol grip nozzle
    • Icebox, starboard, fitted with gasketed lid, gas spring actuator, full length stainless steel piano hinge and custom latch
    • Rod-gaff racks, port and starboard
    • (4) rod holders
    • Scuppers, self-bailing
    • Transom door with top gate, extreme duty, polished stainless steel hardware
    • Washdowns, fresh and saltwater

    Disclaimer
    The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

      The information you provide in this request form will be sent directly to the broker. We will not share your information with any other person. View full Privacy Policy for further information.